All manuals and user guides at all-guides.com
6.
Operation
Turning the camera on and off
• To switch on the camera, press the power/recording button [1]
for 3-5 seconds.
• To switch off the camera, press the power/recording button [1]
for 3-5 seconds.
If the camera is idle for more than 1 minute, it switches off
automatically.
Inserting a micro SD card
1.
Switch the camera off.
2.
Unscrew the pen and insert a micro SD card (not included) in
the card slot [4]. Push it in as far as it goes.
3.
To remove the micro SD card again, pull it gently in order not to
damage it.
Using the video function
1.
Switch the camera on.
2.
Unscrew the pen and set the switch [7] to 2.
The LED lights orange continuously.
3.
Close the pen.
4.
To start recording, briefly press the power/recording button [1].
The LED flashes blue during recording.
5.
To stop recording, press power/recording button [1] again.
The camera saves the video file on the memory card.
Note: during long recording, the device saves a video file every
20 minutes.
Using the photo function
1.
Switch the camera on.
2.
Unscrew the pen and set the switch [7] to 1.
The LED flashes orange.
3.
Close the pen.
4.
To take a photo, briefly press the power/recording button [1].
The camera saves the photo on the memory card. The blue LED
lights while the photo is taken and saved.
5.
Wait until the LED flashes orange before you take the next
photo.
V. 01 – 13/07/2012
CAMCOLVC16
5
©Velleman nv