Samsung 6+ Serie Guide De L'utilisateur page 24

4
Software Upgrade:
Update the software
to the latest version
To update later,
✎
select Skip.
5
Terms of Service
Agreement
6
Auto Program (1):
Select where your
TV signal comes
from.
7
Auto Program (2):
Select the search
options.
[PE6500-ZC]BN68-04195B-X0L02.indb 24
When Network Settings is complete, your TV will check for a new
software version automatically. If new software is available, the TV
downloads and installs the new software. When the download is
complete, select Next.
If you want to upgrade later, select Skip. For more information, refer
✎
to Software Update (Preference Features → Support Menu) in the
e-Manual.
This may take some time, depending on your network status.
✎
You can only upgrade software if your TV has an active network
✎
connection.
If no new update software is available, a no new updates message
✎
appears on the screen. Select OK.
The Terms of Service Agreement screen appears.
The screen can take a few seconds to display.
✎
The General Disclaimer screen appears. Select Agree. The Privacy
Policy screen appears. Select Agree.
To use Smart Hub, you must select Agree for the Terms of Service
✎
Agreement.
Select the appropriate option for your TV using your remote, and then
select Next.
• I use an aerial cable to connect to TV.: Select if you have an
antenna or a cable connection without a set-top box. If you select this
option, go to 7 - Auto Program (2) Step.
• I use a set-top box.: Select if you have a satellite or cable set-top
box. You do not need to run Auto Program. If you select this option,
go to 9 - Clock on the next page.
1. Select Air or Cable using your remote. A check appears on your
selection. When done, select Next. You can check both if you have
both connected.
2. If you selected Air, go to 8 - Auto Program (3).
3. If you selected Cable, you'll go to the cable system screen. Select
Digital Cable System. The option window appears. Select the
correct cable signal format; STD, HRC, or IRC. Most cable systems
use STD (Standard). Repeat the same process with Analog Cable
System.
4. When done, select Next.
English - 24
2012-02-23 4:34:39