Deli Bin; Convertible Vegetable/Meat Drawer, Crisper And Covers; Wine Rack; Utility Bin - Sears Galaxy 10655132701 Guide D'utilisation Et D'entretien

Deli Bin

The deli drawer stores raisins, nuts, spreads, and other small
items at normal refrigerator temperatures.
To Remove and Replace the Deli Bin:
1. Remove the deli bin by sliding it straight out to the stop. Lift
the front and back of the bin up and out of the shelf supports.
Tilt the bin sideways to remove from the refrigerator
compartment.
2. Replace the deli bin by sliding it back past the stop and
pushing into place.
Convertible Vegetable/Meat Drawer,
Crisper and Covers
(on some models)
Crisper and Convertible Vegetable Meat Drawers
To Remove and Replace Drawers:
1. Slide crisper or meat drawer straight out to the stop. Lift the
front of drawer with one hand while supporting the bottom of
drawer with other hand and slide the drawer out the rest of
the way.
2. Replace the crisper or meat drawer by sliding it back in fully
past the drawer stop.
Crisper or Vegetable/Meat Drawer Covers
To Remove and Replace Covers:
1. Remove the crisper and meat drawers. Press up in center of
crisper glass insert until it rises above the plastic frame.
Holding the crisper glass firmly, carefully slide the glass insert
forward to remove.
2. Lift crisper cover frame and remove. Repeat steps to remove
the meat drawer cover.
3. Replace back of meat drawer cover frame into supports or
slides on side walls of the refrigerator and lower or slide the
front of the cover frame into place.
4. Slide rear of glass insert into cover frame and lower front into
place. Repeat steps to replace the crisper cover.
All manuals and user guides at all-guides.com
To Install and Remove the Wine Rack:
1. Install the wine rack by aligning it with the three shelf tabs
2. To remove the wine rack, lift it straight up and off the shelf
NOTE: For long-term storage, place eggs in a covered container
or in their original carton on an interior shelf.
Your model may have some or all of these features. Features that
can be purchased separately as product accessories are labeled
with the word "Accessory." Not all accessories will fit all models.
If you are interested in purchasing one of the accessories, please
call the toll-free number on the cover or in the "Accessories"
section.
To Remove and Replace the Shelf:
Style 1
1. Slide the shelf to one side. Tilt the shelf upward to remove the
2. Replace the shelf by inserting the left side of the shelf into the

Wine Rack

(on some models - Accessory)
located on the bottom of the shelf. Pull the wine rack straight
down until it locks onto the shelf tabs as shown.
tabs.

Utility Bin

(on some models - Accessory)

FREEZER FEATURES

Freezer Shelf

(number of shelves varies with model)
shelf from the support holes. To remove the left side from the
support holes, pull the shelf up and to the right.
support holes. Lower the right side of the shelf and insert into
support holes.
NOTE: Be sure that both sides of the shelf are positioned
evenly in the shelf support holes and the shelf is secure.
13