Initial Setup; Password Change - Samsung UE105S9W Mode D'emploi

Initial setup

The initial setup dialogue box appears when the TV is first activated. Follow the on-screen instructions to finish the initial setup process, including the selecting the menu language, scanning
channels, connecting to the network, and more. During each step, either make a choice or skip the step. You can manually perform this process at a later time in the
- If you connect any device to HDMI1 before starting the installation, the
- If you do not want to select
Set-top box

Password Change

>
System Change PIN
Changing the TV's password.
1. Run and then enter the current password in the password field. The default password is "0-0-0-0" (France: "1-1-1-1").
Change PIN
2. Enter a new password and then enter it again to confirm it. The password change is complete.
- If you forgot your PIN code, press the buttons in the following sequence to reset the PIN to "0-0-0-0" (France: "1-1-1-1"):
For the Standard Remote Control: In Standby mode:
For the Samsung Smart Control: When the TV turns on:
Channel Source
, please select .
Aerial
→ 8 → 2 → 4 →
MUTE POWER
→ Volume up →
MUTE
will be changed to Set-top box automatically.
(On)
→ Volume down → → Volume up →
RETURN RETURN
English - 13
> menu.
System Setup
RETURN