Makita DCU180 Manuel D'instruction page 20

1
► 1. Fixing nut
5. Loosen the adjusting sleeve and fixing nut.
1
► 1. Adjusting sleeve 2. Fixing nut
6.
Tighten the fixing nut only.
2
20 ENGLISH
1
► 1. Fixing nut
7. Make sure that the brake lever is in the halfway
position when it is fully pulled. If the brake lever is in the
halfway position, go to step 13. If the brake lever is not
in the halfway position, go to step 8.
► 1. Brake lever
8. Loosen the fixing nut only.
1