Thermometer - Marathon CL030027-FD-NA Mode D'emploi

Thermometer

Press the
• °C/°F
If the temperature is out of the measurable range, LL.L (beyond the
•
minimum temperature) or HH.H (beyond the maximum temperature) will
be shown on the LCD.
NOTE: The clock might not work properly if the temperature is higher than
50 °C.
Troubleshooting
Use a pin to press the
•
time, even when the radio-control icon is visible on the display. This may
happen when the external noise is strong enough to interfere with the
time signal.
Press the button on the outdoor remote sensor if the readout is
• RESET
incorrect or does not respond.
Precautions
The clock loses its time information when the battery is removed.
•
Set up the outdoor remote sensor away from direct sunlight and rain.
•
Do not subject the clock to excessive force or shock.
•
Do not expose it to extreme temperatures, direct sunlight, dust, or
•
moisture.
Avoid contact with corrosive materials. Do not clean the device using
•
abrasive or corrosive materials or products. Abrasive cleaning agents may
scratch the plastic parts and corrode the electronic circuits.
Do not tamper with any of the internal components of this clock. This
•
may cause damage to the components.
button to set temperature in Celsius or Fahrenheit.
button if the clock is displaying the incorrect
RESET
EN