Introduction; Safety Instructions - EAS ELECTRIC EMH46RN Manuel D'instructions

Introduction

These instructions have been drawn up for your safety and
that of others. You are therefore requested to read them
carefully before installing and using the appliance. Keep
this instruction manual for future reference as necessary. If
the appliance is sold or moved, make sure that the
manual is handed over to the new user.

Safety instructions

 Installation of the appliance and its connection to the
electrical mains must only be carried out by QUALIFIED
PERSONNEL. Before any procedure, it is important to
check that the appliance is DISCONNECTED from the
electrical mains.
 It is risky to modify or attempt to modify the characte-
ristics of this product.
 After removing the appliance from the packaging, make
sure that it is undamaged and that the electrical lead is
in perfect condition. Otherwise, contact your dealer
before putting the appliance into operation.
 EAS Electric Smart Technology S.L. declines all respon-
sibility in case of failure to comply with the accident
prevention regulations.
 Make sure that air is able to circulate freely around the
appliance. Poor ventilation produced a shortage of oxygen
 Make sure that the appliance is supplied with the type
of gas indicated on the relative sticker next to the mains
gas connection pipe.
 Use of a gas cooking appliance produces heat and
moisture in the room in which it is installed. Ensure that
the room is well ventilated by keeping the air intakes
open and in good working order or by installing an
extractor hood with discharge pipe.
3 V.1