Installation - Electrolux EQT4520BOG Notice D'utilisation

76 www.electrolux.com

INSTALLATION

WARNING!
Refer to "Safety information" chap-
ter.
Before the installation
Before the installation of the appliance, re-
cord the information below from the rating
plate. The rating plate is on the bottom of
the appliance casing.
• Model ...........................
• PNC .............................
• Serial number ....................
BUILT-IN APPLIANCES
• Only use the built-in appliances after you
assemble the appliance into correct
ASSEMBLY
All manuals and user guides at all-guides.com
built-in units and work surfaces that align
to the standards.
CONNECTION CABLE
• The appliance is supplied with the con-
nection cable.
• Replace the damaged mains cable with
a special cable (type H05BB-F Tmax
90°C; or higher). Speak to your local
Service Centre.
If, you use the accessory frame C-FRAME,
first read the instruction supplied with the
frame before you install the appliance.
min.
500mm
min.
50mm
R 5mm
490 mm
+1
340 mm
+1
min.
50mm
min.
5mm
600mm