ALPATEC MG 6 Mode D'emploi page 10

All manuals and user guides at all-guides.com
notice MG6: notice MG1
Room <= 10°C
temperature
Recommended STOP
size
- When the ice tank is full the machine stop and (g) indicator lights on.
* if the ambient temperature is over 25°C, use HT function (12). The ice maker will adapt the round time.
HOW TO STOP THE ICE MAKER?
If you want to stop ice production, Press button M / A (10).
Note: when the production will start again, the appliance will start with an ice off round in order to take
out all the remaining ice in the ice making chamber (6).
Note: when the production will start again, the appliance will start with an ice off round in order to take
out all the remaining ice in the ice making chamber (6).
First, unplug the appliance.
Warning: do not touch the evaporator. Take out all the remaining cubes in the appliance (ice cube tank
(5) and ice making chamber (6) if needed). Take out the ice tank, clean it with soft soap and rince it with
clear drinking water.
Take out the Drainage knob (9), remaining water will flow out.
To completely drain the machine, smoothly tilt it (do not exceed an angle of 45°).
Use a soft damp cloth to wipe the inside and outside of the ice maker.
Never use any abrasive or chemical product.
Rinse several time with clean drinking water to flush out any dirt or soap residue.
Wipe over with a dry cloth. Put back the water tank.
Put back the Drainage knob (9).
27/01/10 14:40 Page 10
10 to 15°C 15 to 20°C 20 to 25°C
Small and Small, Medium
Medium Medium and Large
CLEANING
CLEANING
10
25 to 32°C >= 32°C
Hot * STOP
large