Publicité
Les langues disponibles
Les langues disponibles
Factory settings are marked in bold. To
change the oven back to the factory
setting, simply select the option that is
marked in bold.
In order for any changes to be saved, the
START pad must be pressed after
selecting an option. Shutting the oven
door or pressing the STOP pad will not
save changes.
Numbered Pads
1
End of Cycle Beep
2
Speaker Volume
3
Key Beep
4
Keyboard Enable
Window
5
Add Time During
Heating
6
Reset Door Open
All manuals and user guides at all-guides.com
Options such as beep volume and maximum cooking time can be changed
to suit individual preferences.
To change options:
1. Open oven door.
• If door is closed or STOP pad is pressed before programming is
complete, changes are discarded and microwave exits programming
mode.
2. Press and hold pad 2 for approximately 5 seconds.
• This begins options mode.
• Microwave will beep and
option mode.
3. Press number pad that controls option to be changed.
• See table below for options.
• Current option will display.
4. Press number pad again to change the option.
• Each time pad is pressed, option will change.
• Match code displayed with code for desired option.
5. Press START pad to save changes.
• To change additional options, repeat steps 3 and 4.
• Changes appear after door is closed or STOP pad is pressed.
Display
Options (Factory Settings in Bold)
OP:10
3 second continuous beep
OP:11
Continuous beep until door is opened
OP:12
5 beeps bursts until door is opened
OP:20
Eliminates beep
OP:21
Sets volume to low
OP:22
Sets volume to medium
OP:23
Sets volume to high
OP:30
Prevents beep when pad is pressed.
OP:31
Allows beep when pad is pressed.
OP:40
15 seconds after oven door is opened, keyboard disabled
OP:41
30 seconds after oven door is opened, keyboard disabled
OP:42
1 minute after oven door is opened, keyboard disabled
OP:43
2 minutes after oven door is opened, keyboard disabled
OP:50
Prevents adding heating time while oven is heating.
OP:51
Allows heating time to be changed while oven is heating when a memory pad
is pressed.
OP:60
Allows oven to resume heating time countdown after door is opened during
cycle.
Cancels heating time count down after door is opened during cycle.
OP:61
0P:
displays. Microwave is now in user
Publicité
