Chauvet DJ SlimPAR 64 Manuel De Référence page 3

EN
Product
Description
Overview
AC Power
Power Linking
Fuse Replacement
The SlimPAR 64 is an LED Par that can go almost anywhere. It has 180
Red, Green, and Blue LEDs with 3- or 7-channel DMX control and can be
operated with the Satellite battery pack for ultra-portability.
Microphone Sensitivity
Adjustment Knob
Bracket
Adjustment
Knob
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
You can link up to 40 SlimPAR™ 64 products at 120 VAC or up to 60
units at 230 VAC.
To replace the F1A, 250 V fuse in the SlimPAR 64:
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Control Panel
LED Display
Back Panel View
3
SlimPAR 64 QRG
Power In
Fuse
Holder
Power Out