Malfunctions; Aftercare; Waste Disposal - FireWare BF Hybrid Mode D'emploi

User Manual
EN
BF Hybrid
6.

Malfunctions

Problem
The BF Hybrid is not
igniting
Large flames are
impossible.
The flames become
smaller during (intensive)
usage.
Other
7. After Care
This chapter describes what maintenance can be done by the user himself. For further maintenance,
revisions, inspections, legal inspections, etc., please contact FireWare.
You can clean the BF Hybrid with (warm) water and household cleaning products, but do not use
chlorine. Using abrasive cleaners, scouring pads, steel wool and similar products can damage your
practice extinguisher.
8.

Waste disposal

Electric appliances, accessories and packaging need to be collected and recycled separately or
disposed off in an environmentally responsible manner.
www.FireWare.nl
Cause
The gas bottle's gas valve is
closed.
The hose's squeeze handle has
not been compressed.
The fuel has been used up.
The gas hose is damaged or
kinked.
The fuel has almost run out.
The regulator has frozen.
The outside temperature is too
low.
Butane has been used with too
low a temperature.
The gas hose is damaged or
kinked.
The regulator has frozen.
Solution
Turn on the gas.
Compress the squeeze handle.
Change the gas cylinder.
Check the hoses.
Check the fuel and change this if
necessary.
Wait a moment and try again.
Connect an extra gas cylinder.
Use propane as your fuel.
Check the hoses.
Change the gas cylinder or
connect an extra gas cylinder.
Contact FireWare.
BF Hybrid
17