Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
User Manual
EN
BF Hybrid
4.
Use
2
1.
Gas cylinder (propane or butane)
2.
Gas valve
3.
Gas hose with squeeze handle
4.
Pressure regulator
5.
BF Hybrid
6.
Gas connection
7.
Burner
The BF Hybrid can be used with either propane or butane. We recommend using propane, as butane
may still be liquid with temperatures around the freezing point, which is when it may not be used as
fuel for the BF Hybrid.
Gas cylinders with contents of more than 10 kg should be used for the most realistic flame effect.
With low temperatures we would recommend connecting two parallel gas cylinders in order to
guarantee sufficient gas. A series coupling is available for this purpose (049-092-008).
Please note: always check the practice extinguisher, the gas cylinder and the gas hose for any signs
of damage before use. Never use damaged parts.
1.
Position the practice extinguisher outside on a flat, hard surface, without any flammable
objects nearby (dead grass, leaves, trees, shelters).
2.
Connect the BF Hybrid (5) to the gas cylinder (1) using the gas hose with the squeeze
handle (3). The shortcut should be used for connection to the BF Hybrid (6) and the
threaded side should be secured to the gas cylinder's gas valve (2).
3.
You have the option of filling the BF Hybrid with water for a more realistic effect, or to
mimic a liquid fire. The BF Hybrid can also very effectively be used without water.
Please note: a date is printed on the gas hose. This date is the maximum use by date; the hose
must be replaced before this date is reached.
www.FireWare.nl
4
3
1
6
5
7
BF Hybrid
15
Publicité
Table des Matières
