Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
WARNING ! Do not handle cutting parts without gloves as
they are sharp and can become hot after use, potentially
causing personal injury.
Cleaning the product : Illustration 5.1
Pull the power plug from the socket. Let the machine cool for 2 hours outside before cleaning it.
Keep all safety devices, air vents, and motor housing free of debris and dirt. Wipe down the equipment
with a cloth. It is highly suggested that you clean the device after every use. Do not use cleaning agents,
as these can attack the plastic and weaken the structural integrity of the product.
8.2 SERVICING
Part
SPOOL LINE
SPOOL
PROTECTION
POWER CABLE
Action
Before/After each usage
WHETHER TRIMMING SPOOL IS RUNNING OUR OF
CHECK
CHANGE
WHEN IT'S NECESSARY / REFER TO TROUBLE SHOOTING
CHECK
WHETHER THE SPOOL IS DAMAGED
CLEAN
CLEAN THE SPOOL IF HAVE GRASSES ON IT
CHANGE
WHEN IT'S NECESSARY / REFER TO TROUBLE SHOOTING
CHECK
WHETHER THE PLUG IS DAMAGED
WIRE NYLON
35
FR
EN
Every 10H
Publicité
Table des Matières
