Connection - Teac T-R610DAB Manuel Du Propriétaire

A
OPTICAL COAXIAL
DIGITAL
IN
Digital Audio Device
(CD Recorder, DA converter, etc.)
A DAB/FM Indoor Antenna
Connect the T-type DAB/FM antenna to the socket, extend
the lead vertically and attach it to a window frame or wall
with thumbtacks, or the like, where reception is best.
< You can check the antenna adjustment or positioning for
the best reception by viewing the signal strength on the
display. (See page 10 or 12 for details.)
B DIGITAL OUT terminals
DAB's digital audio signal is output from this terminal. If you
want to record digitally, or decode the signal using an
external digital decoder, connect these digital output
terminals to the appropriate digital input terminals of a
digital recording device or a decoder.
Use a good quality RCA coaxial cable or optical digital cable.
< Keep the supplied cap to cover the optical terminal when it
is not in use.
4
All manuals and user guides at all-guides.com

Connection

B C
R L
TUNER
Amplifier
CAUTION:
< Switch off the power to all equipment before making
connections.
< Read the instructions of each component you intend to use
with this unit.
< Be sure to insert each plug securely. To prevent hum and
noise, avoid bundling the signal interconnection cables
together with the AC power cord or speaker cables.
C LINE OUT jacks
Analog 2-channel audio signal is output from these jacks.
Connect these jacks to the TUNER jacks of the amplifier with
an RCA cable.
Make sure to connect:
white plug q white jack (L: left channel)
red plug q red jack (R: right channel)
D AC Power Cord
After all other connections are complete, connect the plug
to the AC wall socket.
Be sure to connect the power cord to an AC outlet which
supplies the correct voltage.
Hold the power plug when plugging or unplugging the
power cord.
T-R610DAB
D