Imetec C8501 Mode D'emploi page 16

All manuals and user guides at all-guides.com
EN
uSER INSTRucTIoNS
• before inserting or removing the shells, ensure the plate
is cold;
• insert the shells (12, 13 or 14) making them slide on the
bodywork (2);
• connect the plug (9) to the mains;
• press the
on;
• select the desired temperature between 140°C and
230°C, depending on the type of hair and the desired
effect; the temperature can be varied at any time by
pressing + or - (7);
• after having selected the desired temperature, the
buttons lock can be activated by pressing the
button (5) twice and quickly. This function prevents
accidental temperature changes while using the plate.
The activation of the buttons lock is signalled by the LED
(3) going on; the lock can be disconnected by pressing
the
• the functioning LED (4) flashes until the plates reach the
set temperature. Once the temperature is reached, the
functioning LED (4) remains on;
• take a thin lock of hair, the same width of the plate and
place it between the two plates;
• with one hand keep the lock of hair taut and with the
other, slide the closed plate from the roots towards the
ends; In order to discover the numerous methods and
effects that can be achieved using the plate, consult
the Easy Styling Guide.
• once hair styling is completed, switch-off the appliance
by keeping the
the appliance from the socket.
Note: It is possible that steam develops during
straightening; this is excess humidity in the hair that
evaporates.
MI000549.indd 14
button (5). The functioning LED (4) goes
button (5) twice once again;
button (5) pressed and disconnect
14 14 14 14 14 14 14 14
21/04/11 19.30