How To Transport The Appliance; Main Components Of The Appliance; Main Components Of The Control Handlebar; Main Components Of The Column - Minuteman ROS 17 ORB 115V Manuel D'utilisation Et D'entretien

To safely transport the appliance, proceed as follows:
1. Do what is required to make sure the appliance is in a safe
condition (see "APPLIANCE SAFETY").
2. Using a chute, bring the appliance up onto the pallet, pushing
it backwards.
3. Lay the brush head on top of the pallet.
4.
The basic components of the appliance are as follows:
1. Control handlebar.
2. Brush head.
3. Brush head carter.
4. Brush. (ACCESSORY)
5. Pad holder.
6. Power cable (ACCESSORY)
7. Solution tank kit.
1. dead man's lever.
2. Control lever main switch (positioned under the grip of the
handlebar).
2
3
7
1
1. Upper support solution tank kit.
1
2
1

HOW TO TRANSPORT THE APPLIANCE

5. Now the appliance can be transported safely.
ATTENTION: You are advised to always wear protective
gloves, to avoid the risk of serious injury to your hands.
ATTENTION: When transporting the appliance on vehicles,
secure it according to the directives in force so that it cannot
slide or tip over.

MAIN COMPONENTS OF THE APPLIANCE

7
2-3
4-5
1

MAIN COMPONENTS OF THE CONTROL HANDLEBAR

3. Handlebar tilt adjustment lever.
4. Detergent distribution valve control lever.
5. Brush head motor thermal circuit breaker.
6. Power cable.
7. Spray kit control switch
1
5
4
2

MAIN COMPONENTS OF THE COLUMN

2. Lower support solution tank kit.
3. Attachement for power cable
4. Lower cable tidy.
2
1
6
6
3
4