Parts Of The Device - Fagor FG620 Notice D'utilisation

-Always place the iron on a stable, flat and heat-resistant surface.
-Don't load weights on the monotube nor try to squash it.
-Don't wind the cable around the device.
-Check carefully that the label of the fabric to iron matches the setting and the
temperature of the iron.
-Always place the iron on its seat on the boiler, don't let the iron put on fabrics or
elsewhere.
INSTALLATION
Take the device out of the box and remove the packing. In order to ensure a
sufficient ventilation, the distance between iron and the wall or other objects should
be at least of 15cm on the back and of 15cm on the side.

PARTS OF THE DEVICE

1.Water Inlet Cover
4. Steam Trigger
7. Iron 8. Station
11. Power Cord
14. Switch Button
How to use
1.Place the device on a stable and heat-resistant surface
2.Twist off the tank
3.Supply tap water or demineralized water. The water tank capacity is 1.3liters..
All manuals and user guides at all-guides.com
2. Water Tank
5. Temperature pilot lamp
9. Water Tank Locker
12. Steam Ready Indicator
15. Steam Control Knob
Pagina 13 van 19
3. Steam Button
6. Temperature Control Dial
10. Interconnection Cord
13. Lower Water Indicator Light