Standard Osd Operation; Osd Function Description; Color Temperature; Auto Adjust - NEC MultiSyns LCD1700NX Mode D'emploi

Standard OSD Operation

1. Press any front panel key to activate the OSD menu.
2. Use Select Up or Down keys to move up or down through the menu. The parameter
will be highlighted when selected.
3. Then use + or - to increase or decrease the value of the parameter, or make selection
between different options.
4. To quit the OSD screen at any time during the operation, press MENU key. If no keys
are pressed for a time period, the OSD automatically disappears.

OSD Function Description

Icon Item
BRIGHTNESS
CONTRAST
ANALOG*
CONTRAST
AUTO*
CONTRAST
COLOR
TEMPERATURE

AUTO ADJUST*

LEFT/RIGHT*
UP/DOWN*
H.SIZE*
FINE*
SATURATION
HUE

FLESH TONE

*: Analog input only
LCD1700NX(English).PM6
Function Description
To increase or decrease the brightness.
To increase or decrease the contrast.
To increase or decrease the contrast; fine adjustment.
We recommend that CONTRAST is first set to 50.
Adjusts the image displayed for non-standard video
inputs.
Pressing "–" or "+" to select 9300, 7500, 5500, NATIVE
and USER. Only when selecting USER, you can make
adjustments to the R/G/B content, otherwise not.
Press + and – simultaneously to restore to factory default
setting.
Press + to turn on this function. The Auto-Adjust will
automatically adjust V-Position, H-Position, H.Size,
and Fine, the whole process takes about 5 seconds.
To move the screen toward left or right.
To move the screen upward or downward.
The dot clock is fine-adjusted after auto adjust.
To increase or decrease the snow noise of the image.
To increase or decrease the saturation.
To increase or decrease the hue.
To adjust the colors of natural colors.
13
MultiSync LCD1700NX
02.2.12, 3:50 PM
11