Vaisala CAB100 Guide Rapide page 9

Installing the enclosure
• 4‑mm Allen key
• 10-mm wrench
• Drill and 8-mm drill bits for making the installation holes
• Spirit level
CAB100 is shipped with a mounting frame and installation accessories for indoor wall
installation. If the screws delivered with the mounting frame are not suitable for the wall
material in the installation location, use any appropriate screws to attach the frame.
See also Enclosure dimensions (page
CAUTION!
shavings may damage the equipment inside the cabinet.
Installing CAB100A with mounting frame
Figure 1 CAB100A wall installation accessories
1 Hole for wall plug (4 pcs)
2 Mounting slot (2 pcs)
3 Wall plug (4 pcs)
4 Hex wood screw M6×40 DIN571 A2 (4 pcs)
16).
Do not drill holes in the backplate or the cabinet enclosure. Drill
1
2
3
4
mm
[in]
9