Axis P3363-VE Guide D'installation page 15

AXIS P33-VE Network Cameras Installation Guide
Adjust the Lens
Open the Live View page in the web interface and make the following adjustments to the camera:
Horizontal line
Lens holder
1. Loosen the locking screw.
2. Turn the lens holder to the desired position.
3. Turn the lens to make sure the (horizontal) lines on either side of the lens are aligned
horizontally.
Note:
Ensure that the mark on the lens cover, between the horizontal lines, is facing up.
4. Once satisfied, gently tighten the locking screw and to secure the camera's position.
5. Open the Focus Adjustment page in the Web interface under Setup > Basic Setup > Focus &
Zoom, and follow the on-screen instructions. Use the image window to adjust the focus and
zoom. See the online help files for more information.
Notes:
• Due to the dome's refraction, the image may appear slightly out of focus once the dome has been placed.
To correct this go to the Focus Adjustment page in the Web interface under Setup > Basic Setup > Focus
& Zoom, and adjust the focus again.
Caution!
Adjusting the focus and zoom manually can damage the lens.
Mark
Locking screw
Page 15