Wilfa MOIST C Instructions page 15

TROUBLESHOOTING
Problem Possible reasons
Power lamp is off Humidifier is not
when switched on. plugged in.
Power cord is damaged. Immediately discontinue
Humidifier is defective
or malfunctioning.
Power lamp is on Humidifier is not turned
when switched on, on.
but no mist come
The target humidity is
out.
reached.
Water shortage No water in the tank.
indicator is on.
Water level is low.
The water level required
has not yet reached
the vaporization
compartment.
The water tank isn't well
positioned.
The humidifier isn't on a
flat surface
Humidifier Humidifier is new.
produces an
unusual smell
Dirty water or water
sitting too long.
Residual smell from
diffusing aroma oil on
the aroma cotton.
MOIST C · HU-430CW
Solutions
Plug the humidifier into a
powered electrical socket.
use and contact Customer
Support.
Press the power button to turn
it on.
Press the power button to turn
it on.
Increase the target humidity or
change mode.
Refill the water tank wait at
least 1 minute.
Wait at least 1 minute.
Check the positioning of tank
on the base.
Check the positioning of the
humidifier.
Take out water tank, open
cover, let it stay 12 hours in
cool position.
Clean water tank, fill with clear
water.
Remove the aroma cotton,
rinse it under clean water and
allow it to dry.
13
EN