Lexmark X820e MFP Mode D'emploi page 39

Using the X820e X820e
MFP X7500 Option in ption in
Germany
Using the X820e he X820e
MFP X7500 Option in Option in
Switzerland
single terminal connection to the Public Switched Telephone Network
(PSTN).
This applies to all X820e MFP/X7500 Options which bear the
following mark:
This equipment is designed to inter-work with PSTN networks that
accept analog signals.
However, due to differences between the individual PSTNs provided
in different countries, the TBR 21 certification does not, in itself, give
an unconditional assurance of successful operation on every PSTN
network termination point. In the event of problems, you should mination point. In the event of problems, you should
contact your equipment supplier.
Lexmark does not currently know of interoperating difficulties for the
following countries:
Austria
France
Greece
Portugal
Spain
The X820e MFP/X7500 Option requires a German billing tone filter 820e MFP/X7500 Option requires a German billing tone filter
(P/N 14B5123) to be installed on any line which receives metering
pulses in German.
The subscriber may request that metering pulses be placed on the
line, or can have them removed by calling the German network
provider. Normally, metering pulses are not provided unless
specifically requested by the subscriber at the time of installation.
The X820e MFP/X7500 Option requires a Switzerland billing tone X820e MFP/X7500 Option requires a Switzerland billing tone
filter (P/N 14B5109) to be installed on all equipment used in
Switzerland since metering pulses are present on all analog lines.
7500 Options which bear the
R 21 certification does not, in itself, give
Belgium Denmark
Germany Luxemburg burg
Iceland Ireland
Sweden United Kingdom
Norway
Network
PSTN networks that
Finland
Netherlands
Italy
Switzerland
billing tone filter
ch receives metering
zerland billing tone
ment used in
31
Notices