Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Side brush
Turn on and charge
•
Flip the switch to "I" ，then fully charged (about 4
hours) .
•
Manually place the vacuum cleaner on the dust collection
dock and align it with the charging port. When the blue
indicator of the charging dock flashes 3 times and then
goes out, the charging will begin.
After the vacuum cleaner is connected with the dust
collection dock, the dust collection dock will start dust
collection.
5
APP DOWNLOAD AND
NETWORKING OPERATION
Indicator
LED
NOTE
English
5.1
MOBILE APPLICATION
Scan the QR code and download and install the mobile
application.
If the mobile phone cannot be connected to the robot, please
refer to "Product Use" – "Reset Wi-Fi".
5.2
RESET THE NETWORK
Press and hold the button
time until a voice prompt is heared, then the indicator flashes
slowly in blue, and the machine enters the pairing status.
Indicator:
The blue light flashes slowly: Waiting for connection
The blue light flashes quickly: Connection to Wi-Fi in
progress
The blue light is normally on: Wi-Fi is connected
5.3
ADD A DEVICE
Open the app, create a new account, and follow the
instructions inside the APP.
Before setting up Wi-Fi, please make sure that the vacuum
cleaner and the Wi-Fi network meet the following
requirements.
A. Vacuum：
•
The battery level of the vacuum is greater than 20% or
the vacuum cleaner is placed on the charging dock.
B. Wi-Fi network:
•
Use the correct wireless network password.
•
Do not use a VPN (Virtual Private Network) or proxy
server.
11
NOTE
and the button
at the same
Indicator:
NOTE
EN
Publicité
Chapitres
Table des Matières
