Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
4
INSTALLATION
4.1
COLLECTION DOCK/CHARGING
DOCK
Install the dock
Place the dock against and perpendicular to the wall on a
level, hard floor, then insert the power plug into the socket.
Place the dock
Place the dock against and perpendicular to the wall on a
level, hard floor, without obstacles within 60" in front and 20"
on left and right.
Dust box opening
Filter opening
Dust box
Fan filter
English
•
Install the charging dock or the dust collection dock in a
position where the vacuum cleaner can easily reach. It
is advisable to place the charging dock or the dust
collection dock against the wall on a level, hard floor,
not on the carpet.
•
Always keep the charging dock or the dust collection
dock powered on, otherwise the vacuum cleaner will
not automatically return.
•
To ensure normal charging, please do not move the
charging dock or the dust collection dock frequently.
After the location of the vacuum cleaner is changed, the
main machine may regenerate a map due to failure to
relocate (for details, please refer to this
Manual>Instructions for Operation>Map Management).
4.2
PREPARE THE VACUUM
Remove the protective strip
Before use, remove the protective strips on both sides of the
front bumper.
Install the side brush
Side brush installation: align with the hole and press gently to
fix the side brush on the machine.
10
Filter
Dust bag handle
Dust bag
NOTE
Publicité
Chapitres
Table des Matières
