Whirlpool WSR57R18D Manuel D'utilisation page 4

8. Remove the base grille by opening the freezer door and
removing the two Phillips-head screws. Pull the grille toward
you to remove.
Use a vacuum with an extended attachment to clean the
condenser coils when they are dusty or dirty. Coils may need
to be cleaned as often as every other month. This may help
save energy.
9. Replace the base grille by aligning the ends of the grille with
the leveling assemblies on each side and snapping the grille
into place. Reinstall the screws.
10. Replace all frozen food.
11. Plug in freezer or reconnect power.
12. Set temperature control to desired setting.
Defrosting and Cleaning Your
Manual Defrost Freezer (on some
models)
Risk of Fire or Explosion.
Flammable Refrigerant Used.
Do Not Use Mechanical Devices to Defrost Refrigerator.
Do Not Puncture Refrigerant Tubing.
Defrost and clean your freezer when frost has built up to about
1/4" (0.6 cm) thickness, and thoroughly defrost and clean your
freezer at least once a year. In high-humidity areas, a freezer may
need more frequent defrosting and cleaning.
Do not use abrasive cleaners on your freezer. Do not use cleaning
waxes, concentrated detergents, bleaches, or cleaners containing
petroleum on plastic parts. Damage can occur.
NOTE: The drain cap must be removed before defrosting the
freezer and replaced securely afterward.
1. Press and hold Temp Setting for 3 seconds or turn knob to "0"
to turn off cooling.
2. Unplug freezer or disconnect power.
3. Remove all frozen food. Wrap frozen food in several layers of
newspaper and cover with a blanket. Food will stay frozen for
several hours. You may also store frozen food in a cooler, an
additional refrigerator or freezer, or in a cool area.
4
17-Mar-2021 07:46:05 EDT | RELEASED
WARNING
Explosion Hazard
In some European factories the letter "W" of the part code mentioned herein will be automatically
4. Remove base grille. Open the freezer door and remove the
base grille by removing two Phillips-head screws and pulling
the grille toward you.
5. Reach under the unit and pull the drain hose out through the
opening. The drain hose carries defrost water out of the
freezer and through the area behind the base grille. Place a
large shallow pan under the drain hose. Remove the drain cap
inside freezer.
NOTE: Check the drain pan frequently to avoid water
overflow. Have a second pan handy for easier emptying.
6. Place pans of hot water in freezer with door open to speed
melting. Directing air from an electric fan into freezer will also
help. Do not place fan or any electrical device in freezer.
7. Use a plastic scraper to remove frost.
NOTE: Do not use an ice pick, knife, or other sharp-pointed
tool to defrost freezer. Damage can occur.
8. Wipe water from walls with a towel or sponge.
9. Wash the inside walls with a solution of mild detergent in
warm water or 2 tbs (26 g) baking soda to 1 qt. (0.95 L) warm
water. Do not use abrasive or harsh cleaners.
10. Rinse well and wipe dry with a clean soft cloth.
11. Use the appropriate cleaning method for your exterior finish.
Painted metal: Wash exteriors with a clean sponge or soft
cloth and a mild detergent in warm water. Do not use abrasive
or harsh cleaners, or cleaners designed for stainless steel.
Dry thoroughly with a soft cloth.
12. For models with a drain system, you should replace the drain
hose, drain cap, and base grille.
13. Replace the base grille by aligning the ends of the grille with
the leveling assemblies on each side and snapping the grille
into place. Reinstall the screws.
14. Replace all frozen food.
15. Plug in freezer or reconnect power.
16. Set temperature control to desired setting.
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")