Publicité
computer & interactive stylus
900IW Plus
Note: If you do not have the
eBeam
software installed
™
on your computer, you can
install it from the 3M Digital
Wall Display CD-ROM.
➊
1. Connect the VGA cable
from the VGA/Monitor port
on the computer to the VGA
port on the Digital Wall
Display.
➋
2. Connect the USB cable
from the USB port on the
computer to the Computer–
USB port on the Digital
Wall Display.
3. Connect the PC audio
➌
cable
from the
headphones jack on the
computer to either of the
Audio In–Computer jacks
on the Digital Wall Display.
➍
4. Press the On/Off button
on the Digital Wall Display
to turn on the lamp.
Note: If you are using a
laptop, toggle the display
function by using one of
the following methods:
Fn +
or
Fn + LCD/CRT.
5. Double-Click the eBeam
desktop icon on your
➎
computer
to launch the
whiteboard software.
6. Click the Calibrate button
➏
in the 3M Digital Wall
Display calibrate dialog box.
7. Tap each of the highlighted
➐
targets
with the interactive
stylus.
8. Use the eBeam annotation
➑
tools
to annotate your
presentation.
1-800-328-1371
➌
➊
3
Digital Wall Display
➋
www.3M.com/meetings
Publicité
