BYK LCM III Mode D'emploi page 4

Section 1
Performance specifications
Operating mode
Colorimetric evaluation
Source lamp
Wavelength range
Wavelength accuracy
Wavelength calibration
Wavelength range for color
measurement
Photometric accuracy
Photometric linearity
Stray light
Data log
Physical and environmental specifications
Width
Height
Depth
Weight
Operating requirements
Storage requirements
Additional technical data
Mains connection
Interfaces
Enclosure rating
Protection Class
All manuals and user guides at all-guides.com
Specifications
Specifications are subject to change without notice.
Color measurement
DIN 6162 Iodine color value
ISO 6271 Hazen color value
ISO 4630 Gardner color value
ASTM D 1209 Saybolt color value
ASTM D 1500 Mineral oil color value
Gas-filled Tungsten (visible)
400–700 nm
± 2 nm
Automatic
400 to 700 nm
5 mAbs at 0.0 to 0.5 Abs
1% at 0.50 to 2.0 Abs
< 0.5 % to 2 Abs
< = 1 % at > 2 Abs with neutral glass at 546 nm
> 3.0 Abs. at 500 nm with OG570/3
200 color measurements
220 mm (8.6 in.)
135 mm (5.3 in.)
330 mm (12.9 in.)
4.06 kg (8.95 Ibs) without battery
4.38 kg (9.66 Ibs) with battery
10–40 °C (50–104 °F), max. 80 % relative humidity (non-condensing)
–40–60 °C (-40–140 °F) max. 80 % relative humidity (non-condensing)
15 V- / 30 VA
Plug-in power supply unit: (100–240 V/50–60 Hz)
Use only screened cables with maximum length of 3 meters.
1 x USB type A
1 x USB type B
IP 41 with closed lid
IP 42 with Protective Cover in place
Safety class II
3