BYK LCM III Mode D'emploi page 10

3.4 Connection
1 On/Off switch
2 USB type B
3 Plug in power supply
All manuals and user guides at all-guides.com
The LCM III has two USB interfaces as a standard feature, located
on the back of the instrument
The USB Type A interface is used for communications with a
printer, USB memory stick or keyboard. A USB memory stick is
used to update instrument software.
The USB Type B interface is used for communications with a PC.
The optional Data Trans software must be installed on the PC for
this use.
A USB hub may be used to connect several accessories at a time.
Note: USB cables must not be longer than 3 meters (10 feet).
These USB interfaces enable data and graphics to be output to a
Printer and a PC and upgrade instrument software (see
section 6.1.2 on page
Figure 2 Interfaces
(Figure
38).
4 Cover
5 USB type A
Installation
2).
9