Lupus Electronics LUPUSNET - LE900 Manuel De L'utilisateur page 75

Name
(7) PTZ
(8) Preview
(9) Playback
(10) Status bar
(11) Camera ID
(12) Snapshot
(13) Event log
(14) AutoScan
(15) Full screen
(16) Alarm
(17) Virtual Keyboard
(18) Audio
To Playback the Recorded Video
To switch in Playback mode, click Playback button at the lower right corner of Preview mode
user interface.
In the Select Playback Mode dialog box, select Local Playback if user has enabled the client
record. Select the RealTime Playback if your internet bandwidth is fast and big enough
otherwise choose Download and Playback. Click OK to proceed and Cancel to void this
operation.
Playback in Local Playback Mode
Function
Access PTZ control panel.
Switch to Preview mode. This allows you to view live camera display.
Switch to Playback mode. This allows you to view the recorded video
file.
Display the recoding date, time and hard disk space of DVR unit.
Show the number of cameras that are being viewed. When you are in
single screen mode, click the camera ID number to switch and view
other camera.
Capture and save the screen shot in *.jpg format.
Show the record of activities that take place in the system.
Start/Stop video screen cycle switch.
View in full screen. To return, press the right button of the mouse or
ESC on the keyboard or click the arrow icon. When you switch to full
screen in multiple-screen mode, Left click to toggle to only display one
of the video in the multiple-screen mode or all.
Alert and display warning info.
If the keyboard is not available, you may use the Virtual Keyboard.
Enable/disable audio. User can click the audio icon on the channel to
switch the different channel's volume play. When audio icon is green, it
means the channel audio is playing now.
75