Lupus Electronics LUPUSNET - LE900 Manuel De L'utilisateur page 74

Name
(1) Exit
(2) Split Screen Mode
i
When you are in single screen mode, Right click and Drag a square on the area
–
you want to enlarge.
DVR system doesn't support partial enlarge in full screen mode.
–
(3) Record
(4) EMap
(5) Network
(6) Setup
Function
Call up the Logout dialog box.
In the logout dialog box, you may do the following:
Exit: To close the application
-
Reboot: To restart the DVR system. It is required to enter the
-
password.
Login: Using different ID to login to DVR system.
-
About: Display product information.
-
Minimize: To reduce the DVR to taskbar button.
-
Compact: To switch to compact mode.
-
Guest: To switch to the guest mode. In guest mode, the functions
-
are limited to preview function only. For complete functions of
DVR, please login as an administrator.
Cancel: To exit Logout dialog box.
-
Select from 3 different split screen types to view all the camera, or one
camera over the other or alongside on a single screen. It also allows
you to switch and view different camera number.
Start/stop server and client site video recording.
- Server record: Start/stop recording at MXR DVR server.
- Client record: Start/stop recording at remote client site.
Display the map in each area, and the location of camera/ sensor/
relay and the warning.
Enable/disable remote system access. This feature allows you to
access DVR server from a remote location via internet connection. The
default is disabled.
Configure the system settings.
74