Lupus Electronics LUPUSNET - LE900 Manuel De L'utilisateur page 71

The User Name and User Password is the DVR system login ID and password
(default is superuser/111111).
26. After changed the DVR data, click Search to re-find the DVR server again.
27. Select the DVR server from search result list in MXR Search window and click OK.
28. The new DVR information will display in Server Setting window. Click OK to add the DVR
server.
29. When the DVR server has been added, click OK to exit the System Setting window.
30. And then, click
VIII. Connect an IP Camera
8. Click (Setup) from surveillance application interface. Enter the ID and Password
(default is superuser/111111). In Mode Select dialog, select Server Setup and click OK.
9. Select the Camera. The Camera setting window will show up.
10. Select camera icon and enable the camera
11. Select IP Camera in Input section. Mark Display to show the video of the camera on the
screen. Mark Audio to enable the audio of the camera to be recorded.
12. Enter the Name and Description of the camera.
13. Click IP Setting in IP Camera Information section. Enable Protocol, and then, select
Protocol, Mode, Video Format, Channel, and IP Camera Site of the IP camera.
14. Instead enter IP address of the IP camera; user also can enter URL of the IP camera.
15. Enable Authentication, and then, enter ID and password if IP camera's access authority is
(Network) to connect with the DVR server.
71