General Notes On Mechanics Setup - GAUI X4 Combo Notice D'emploi

7. General Notes on Mechanics Setup

Before starting to set up the mechanics, gather information on some important notes:
• Every model helicopter is only as good as its assembly. Therefore, assemble it carefully and precisely according to
instructions. Incorrectly or wrongly assembled model helicopters will not only fly much worse, they also pose a considerable
safety risk.
• The construction kit contains pre-assembled assemblies. Check for correct and firm fit of the screws before using these
assemblies. Metal/metal screw connections also must be applied with threadlocker.
• Comply precisely with the assembly sketches in the manufacturer's handbook for assembly. Also observe that some
components must be fastened with special threadlocker varnish (not included). The different assembly sketches use the
following symbols for this (also see the figure in manufacturer's manual, page 5).
Screw connection with threadlocker varnish L
L
Safety screw connection* with threadlocker varnish L
L
Screw connection with threadlocker varnish T
T
Screw connection* with threadlocker varnish T
T
Application of threadlocker varnish T
T
Application of instant glue
CA
Application of lubricant
!
Observe correct performance of each assembly section
!
Specifically observe correct performance of the assembly section
!
Correct compliance with the notes in the assembly sketches is of the utmost importance for function and
operational safety of the model.
* Because the operational safety of the model depends on these screw connections, pay special attention to firm connection/
screw connection of the components without overloading the screw material or component.
All manuals and user guides at all-guides.com
25