Before Installation - Stramatel Multisport Pro Serie Mode D'emploi

Multisport

Before installation

In no circumstances does installation require the scoreboard casing to be opened.
The electronic elements controlling the luminous display are mounted on extractable racks (R). In order to be able to carry out any
maintenance, a clear space of at least 30 cm is necessary for the extraction of the racks. Attention: installation must be performed by
qualified staff.
Modules M2, M3 and M4: the mains cable can be taken out through the profile or at the back of the module (points K). In this last case, the
mains cable must be connected in the module before being fixed (see chapter "Electrical installation" – "Mains cable").
Draw the position of the mounting points (F) onto the wall or onto the support frame following the measures of the diagram.
Put plugs or inserts for Ø 8 mm screws.
300 R
K
20
F
K
Z
960
44
956
F
20
610
20
(Z): Holes for mounting or disassembling the front face in some maintenance cases.
ZI de Bel Air 44850 LE CELLIER FRANCE
IA452MB3123-2_D - Installation 452MB3123-2.docx
Pro Range
K
F F
K Z
Z
F
F
Z
F F
1860
42
R 300
F
Z
F
F
Z
F
R 300
stramatel@stramatel.com Tél. +33 (0)2 40 25 46 90
R 300
K
20
F F
K
Z Z
1960
F F
20
610
42 20
Dimensions in mm
Page 4