In Case Of Fault - Acova Z22940 Notice D'utilisation

4. Taking care of your radiator
Before carrying out any maintenance operation on your appliance, ensure that
it is switched off. Press the
MODE
is selected..
High-quality materials and surface treatment protect your appliance against
corrosion and impacts.
To maximise the service life of your appliance, we recommend you take the follo-
wing precautions:
- Never use abrasive or corrosive products on the outer surfaces of the appliance;
use warm, soapy water.
- Use a dry cloth (without solvent) to clean the control unit.
MAINTAINING THE VENTILATION INLETS
To ensure that your appliance operates normally, it is essential to ensure that
EN dust or any other substance is not allowed to accumulate and block the ventila-
tion inlets situated on the housing at the rear of the appliance. If this happens,
you must clean the inlets carefully using a brush or other implement.
28
button repeatedly until - (
NO HEAT

5. In case of fault

If your appliance stops working, check that:
) mode – your appliance is properly connected to an appropriate power supply (see
section 1),
- the thermostat is heating the appliance as it should (see section 2).
The symbol is shown on the LCD display.
ON
Test that the appliance is heating by initiating the
2.2): the
ON
able to feel the appliance heating up.
If the power cable is damaged, for safety reasons it must be replaced by the
manufacturer, the manufacturer's after-sales service department or a similarly
qualified person.
AFTER-SALES SERVICE
If your appliance stops working or you require spare parts, contact your installer
or dealer.
Prior to making contact and to ensure your problem is dealt with quickly and
effectively, please make a note of:
– the details shown on the appliance nameplate (see section 1.3), the sales refe-
rence for your appliance shown on your dated purchase invoice.
GUARANTEE (see general conditions of sale for the relevant country)
Your radiator complies with Directive 2004/108/EC on the approximation of the
laws of the Member States relating to electromagnetic compatibility (EMC) and
with European standards EN 60335-1 / 60335-2-30 / 60335-2-43.
CANCELLATION OF THE GUARANTEE
The guarantee shall not apply if the appliance is installed, used or maintained in
a way that does not comply with standards in force in the relevant country, good
professional practice, or the manufacturer's instructions. For all other questions
regarding the guarantee, please contact your installer or dealer.
symbol should be displayed and after a few minutes you should be
function (see section
TIMER
EN
29