Product Description And Specifications; Product Features; Technical Data; Noise/Vibration Information - Bosch GDR 12V-105 Notice Originale

OBJ_BUCH-2895-001.book Page 13 Tuesday, July 19, 2016 12:52 PM
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for driving in and loosening screws
and bolts as well as for tightening and loosening nuts within
the respective range of dimension.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Screwdriver bit with ball catch*
2 Tool holder
3 Locking sleeve
4 "PowerLight"
5 Fixture for carrying strap
6 Battery unlocking button*
7 Battery pack*
8 Rotational direction switch
9 On/Off switch
10 Battery charge-control indicator
11 Handle (insulated gripping surface)
12 Universal bit holder*
13 Screwdriver bit*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.

Technical Data

Cordless Impact Screwdriver
Article number
Rated voltage
No-load speed
Impact rate
Maximum torque, hard
screwdriving application
according to ISO 5393
Bolt size
Max. screw dia.
Tool holder
Net weight
* Limited performance at temperatures <0 °C
Technical data determined with battery from delivery scope.
Bosch Power Tools
Cordless Impact Screwdriver
Weight according to
EPTA-Procedure 01:2014
Permitted ambient temperature
– during charging
– during operation* and during
storage
Recommended batteries
Recommended chargers
* Limited performance at temperatures <0 °C
Technical data determined with battery from delivery scope.

Noise/Vibration Information

Sound emission values determined according to
EN 60745-2-2.
Typically the A-weighted noise levels of the product are:
Sound pressure level 87 dB(A); Sound power level 98 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 60745-2-2.
Impact tightening of fasteners of the maximum capacity of the
tool: a
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
GDR 12V-105
from the effects of vibration such as: maintain the tool and the
3 601 JA6 9..
accessories, keep the hands warm, organisation of work pat-
terns.
V= 12
-1
min 0 – 2600
Assembly
-1
min 0 – 3100
Battery Charging (see figure A)
Note: The battery supplied is partially charged. To ensure full
Nm 105
capacity of the battery, completely charge the battery in the
M4 – M12
battery charger before using your power tool for the first time.
mm 8
The lithium-ion battery can be charged at any time without re-
¼" hexagon socket
ducing its service life. Interrupting the charging procedure
kg 0.96 does not damage the battery.
The lithium-ion battery is protected against deep discharging
by the "Electronic Cell Protection (ECP)". When the battery is
kg
°C
°C
(triax vector sum) and uncertainty K
h
2 2
=9 m/s , K =1.5 m/s
h
1 609 92A 2N7 | (19.7.16)
English | 13
GDR 12V-105
1.0 – 1.2
0...+45
-20...+50
GBA 12V..
GBA 10,8V..
GAL 12.. CV
AL 11..CV