Cargo vedpak 178 Manuel D'installation page 6

CONTROL WIRES
1. Route Control wires towards the dash area to a switch panel (user-supplied).
2. Connect the required wires to the switch panel.
WARNING MODE
Activate warning Mode by applying +VDC to WHITE wire. There is a list of built-in flash patterns to choose
from. While in WARNING Mode, tap +VDC to YELLOW wire:
• Once for next pattern.
• Quickly 3 times for FP#0.
DIM MODE: The Lightbar can be activated in DIM Mode by applying +12VDC to YELLOW wire
FP# ECE R65 Mode
0
Double All
1
Quad All
2
Single All
3
Double Split
4
Quard Split
5
Single Split
6
171849
Vedpak 178_Version 2_061013