Bestway SALUSPA VANCOUVER AIRJET PLUS S100204 Manuel De L'utilisateur page 11

Masquer les pouces Voir aussi pour SALUSPA VANCOUVER AIRJET PLUS S100204:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

9
GFCI Test
IMPORTANT: RISK OF ELECTRIC SHOCK. THE GFCI MUST BE TESTED
BEFORE TURNING ON THE PUMP EACH TIME.
1. Plug the GFCI into a power outlet, the indicator turns red.
2. Press the test button, the indicator turns off.
3. Press the reset button, the indicator turns red and the spa is ready for use.
WARNING: The GFCI plug must be tested before each use to avoid risk of electric shock.
WARNING: Before inserting plug into a power outlet, make sure the current rate of the power outlet is
suitable for the pump.
WARNING: Do not use the pump if this test fails. For assistance, please visit the support section on our
website, www.bestwaycorp.com.
WARNING: Using an extension lead or multi plug adaptor with the spa heater can cause the plug to
overheat, causing damage to the equipment and surrounding items. The spa is a class I electrical
appliance and must be connected directly to a grounded socket. It is recommended to only use a socket
which is resistant to humidity and capable of high power loading. Regularly check the plug and socket
for signs of damage before using the spa – do not use the spa if the plug or socket is damaged. If you
are unsure about the quality of the electrical supply, please consult a qualified electrician before use.
NOTE: When inflating, you will notice that air will be expelled from the area where the air hose connects
to the pump, this is normal for technique requirements.
NOTE: Do not use an air compressor to inflate the pool.
NOTE: Do not drag the pool on rough ground as this may cause damage to the pool liner.
NOTE: Inflation time for reference only.
When inflating, you will notice that air will be expelled from
the area where the air hose connects to the pump, this is
normal for technique requirements.
Important: Don't cover the holes on the base of the
inflation hose. This operation will over inflate the liner and
damage the structure.
Do not use an air compressor to inflate the pool.
Do not drag the pool on rough ground as this may cause
damage to the pool liner.
Inflation time for reference only.
303021246561_14.0x21.0cm_60028,60030_美规AirJetPlus说明书21季_英
10
11
11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Saluspa milan airjet plus s1002046002860030

Table des Matières