Material And Component Features; Product Features - Corradi Defense Manuel Utilisateur

Defense

MATERIAL AND COMPONENT FEATURES

To enter the Corradi production cycle, materials must pass all tests required by the Company's Quality System.
The features listed below identify the peculiarities of the materials and therefore should not be understood as manufacturing defects, with the exception of the cases noted in the non-conformity/defect column.
Warnings:
For complaint and warranty terms, see the Warranty chapter.
Any change made to the product not expressly authorised by Corradi voids the warranty.

Product features

Structures situated in urban environments are subjected to pollutants (smog, acid rain), smoke from chimneys,
cooking fumes, and inclemencies of the weather in general.
General
Therefore it is normal for the canvas or the framework to get dirty.
The framework and canvas are not self-cleaning.
The lateral tilting of the framework is not a sign of structural weakness, but rather is regarded as normal for the type
Poles
of framework. The framework was designed by qualified engineers using Eurocodes.
Depending on the installation conditions it is possible for the canvas to get dirty (pollutants, smoke from chimneys,
smog, etc.). In this case it may be necessary to clean the canvas more frequently, as explained in maintenance
chapter.
The canvas is not immune from burning caused by cigarette butts, etc.
Canvas
In particular situations it is possible for condensation to form in the inner part of the canvas. To limit this condition
keep the area well ventilated.
The appearance of mould in the canvas embossing is due to the presence of humidity on the canvas which favours the
growth of micro-organisms. It is therefore necessary to clean the canvas at regular intervals, more frequently where necessary.
rev. 0 - 03.2017
All manuals and user guides at all-guides.com
Corradi SrL - USer manUaL
Non-conformity / defect
7 of 17