Disassembling The Dispenser Parts For Bin Cleaning - Welbilt MANITOWOC S160 Serie Manuel D'installation, D'utilisation Et D'entretien

Section 4
8. Remove the paddle wheel guard from the ice
dispense snout.
DISASSEMBLING THE DISPENSER PARTS FOR BIN
CLEANING
!
Unplug unit before servicing or cleaning.
Ice dispenser bin contains moving parts that can
move at any time and will cause injury if hands are
in the way.
Paddle Wheel
1. These parts will be removed: agitator pin, agitator
and paddle wheel.
Part Number 000007646 Rev02 5/20
Paddle Wheel
Guard
Warning
Agitator
Paddle Wheel Pin
2. Pull on the hand-removable agitator pin until it is
clear of the agitator bushing.
3. Push the agitator toward the back of the bin until the
agitator is free of the paddle wheel hub. Remove the
agitator by sliding to one side as you pull forward
until the agitator shaft clears the bushing.
4. Slide the paddle wheel from the motor shaft and
remove.
Maintenance
Agitator Pin
Paddle Wheel Hub
13