Electrolux ERF3867SOW Notice D'utilisation page 40

40 www.electrolux.com
7.9 Starting the water system
for the first time.
Ensure proper connection to the water
supply, refer to "Connecting the water
hose".
7.10 Installation of the water filter
All manuals and user guides at all-guides.com
2
1
• Insert the filter in the slot found in the
back of the air lever flap.
• Close the air lever flap.
The filter should be handled care-
fully so fragments do not loosen
from the surface.
Make sure that the air lever flap is
closed to obtain proper function.
1. Open the tap on the water connec-
tion.
2. Start the refrigerator.
The water system main valve opens and
the pump starts to fill the system.
Unpack the filter.
• Remove the accessories in front of the
water module and open the service
hatch.
• Place a cloth or a piece of kitchen towel
in the space beneath the water filter.
• Pull the bypass cartridge outwards,
grasping the lower part, until the water
bypass cartridge is automatically ejec-
ted.
• Remove the protective wrapping of the
new water filter and insert the new filter
firmly into the filter connection.
• Push the water filter back to its original
position.
• Remove cloth or towel and make sure
that spilled water is wiped off.
• Close the hatch and remount the interi-
or.
• Keep the bypass cartridge for future
use.
• Select Still cold water and dispense
about 2 litres of water. There may be
some air to start with.