Warning Symbols; Machine Symbols - Garland XTRIM FIRST PG Manuel D'instructions

3. WARNING SYMBOLS

Warning labels indicate reuired information for the use
of the machine:
Warning and care.
It is necessary to read this manual
carefully before using this machine.
Use protective non skid boots with
protective steel.
Use appropriate security gloves.
It is necessary to use eye and acoustic
protection at any time.
in which you are working.
Attention!, Danger!: The cutting tool can
project hard objects.
Attention!: Do not touch the cutting blade.
Caution! Hot Surface.
Danger, fire and explosion.
Do not let people enter in
the work area. This area
will be of a diameter of
15 meters from the point
27/124

4. MACHINE SYMBOLS

In order to ensure safe operation and maintenance of
the machine are the following symbols in the machine.
DeFuel tank. Located in the combustible
tank cap. Mix 2 stroke oil and gasoline.
Air positions:
Position for starting the machine in cold.
Located on the of air filter cover.
Open = Normal operating position.
Located in the top of the filter.
Positions start switch located on the right handle of
the machine:
"I"= On (The machine is ready to work).
0
"O" = Off (The machine don´t work).
Rotation for unblocking the nylon head
(situated on the nylon head).
Rotation for blocking the nylon head (situ-
ated on the nylon head).
Never use only fuel or fuel in a bad
state. Mix unleaded fuel grade 95
and totally synthetic oil for 2 stroke
engines to 2.5% (40:1).
English