Warning Symbols; Machine Symbols - Garland BEST 524 QG Manuel D'instructions

English

3. WARNING SYMBOLS

Warning labels indicate required information for the
use of the machine.
Warning and care.
It is necessary to read this manual
carefully before using this machine.
Use protective non skid boots with
protective steel.
Use appropriate security gloves.
It is necessary to use eye protection at
any time.
It is necessary to use acoustic protection
at any time.
Helmet must be worn always.
Do not use cutting discs of more than eight
teeth.
Caution! Maximun speed of gear 9500
-1
min .
MAX. 9500 min
-1
Danger, be careful when transporting the
brush cutter.
Complies with EC Directives.
Guaranteed level of sound power Lwa,
Db(A).
113
Attention!, Danger!: The cutting tool
can project hard objects.
Do not let people enter in the work
area. This area will be of a diameter
of 15 meters from the point in which
you are working.

4. MACHINE SYMBOLS

In order to ensure safe operation and maintenance of
the machine are the following symbols in the machine.
Engine oil tank.
Fuel tank.
Air positions:
Open = Normal operating position.
Located in the top of the filter.
Open = Normal operating position.
Located in the top of the filter.
Position for starting the machine in cold.
Located on the of air filter cover.
Position for starting the machine in cold.
Located on the of air filter cover.
0
Positions start switch located on the right
STOP -
handle of the machine.
I
"O" = Off (The machine don´t work)
"I"= On (The machine is ready to work)
32/144
Always check the crankcase oil
level before starting. Capacity: 0.1
litres. Multigrade oil 20W-40.