Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
MEAT GRINDER
INSTRUCTION MANUAL
DESCRIPTION
(fig. A)
1. Grinding head thread
2. Stainless steel cutter
3. Stainless steel blade
4. Stainless steel screw
5. Stainless steel meat container
6. Tray
7. Pusher bar
8. Sausage mould
IMPORTANT SAFEGUARD
•
Home use only. Do not use for industrial
purpose.
•
Unplug when assembling and
disassembling the unit.
•
Close supervision is necessary when any
appliance is used near children.
•
Under load continuous running of meat
grinder should be not more than 6 minutes
with the following 10 minutes interval for
motor cooling.
•
To avoid jamming, do not force to operate
the unit with excessive pressure.
•
Never try to replace the parts and repair
the unit by yourself.
•
All parts of this product are not allowed to
be disinfected by microwave oven so as
to avoid heat deformation and damage.
All parts and materials in touch with food
meet the requirements of food grade
certification.
•
It's strictly prohibited to put hands or sharp
object into the feeding port and touch the
rotating parts such as screw/cutter/blade/
thread during working to avoid damage
•
If the motor stops auto and cannot be
reversed due to the blocking during
operation, please press "power" key to
stop forward rotation and press "REV" key
to withdraw food, then the motor should
be started to turn forward for normal use.
If still blocked rotation, it's recommended
to clean the screw inside. This method is
to protect the motor.
•
Note: Do not use too much force when
pressing food.
•
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision
or instruction concerning use of the
appliance by a person responsible for
their safety.
•
Children should be supervised to ensure
that they do not play with the appliance.
BEFORE THE FIRST USING
•
Check that voltage indicated on the rating
label corresponds the mains voltage in
your home.
•
Wash all parts (except body) in warm
soapy water.
•
Never try to replace the parts and repair
the unit by yourself.
INSTRUCTION FOR USING
ONE. TAP POSITION (fig. B)
"Power" button: Start/stop (forward turn),
run for 7 min automatically stop;
"REV" button: Reverse, click and reverse
foe 2 sec at a time;
"Function" button: Switch and select
Mutton, Salad, Beef, Sausage, Fish and
Souce 6 positions;
Tip: When the dregs are not smooth or
blocking rotation, press the "REV" button,
screw propeller reversal 2 sec then stop
ASSEMBLING
1. Put the auger, knife and cutter in the meat
container. Then screw it with the screw.
Insert the head into the device and press
the switch.
2. Insert the meat grinder
assembly into the body
machine, and then press
the lock key to lock the
meat grinder assembly.
3. Select the desired gear
and turn on the "power"
to start the motor. Put the
appropriate size of the ingredients into the
meat container feeding port, gently press
down with pusher bar.
4. After use, first turn off the power supply,
open the lock key, then loose the meat
grinder assembly and remove it before
cleaning!
2
MINCING MEAT
•
Cut all foods into pieces so that they
fit easily into the hopper opening.
(Sinewless, boneless and fatless meat is
recommended, approximate size: 20 x 20
x 60mm)
•
Plug and switch on machine.
•
Feed foods into the hopper plate. Use for
it only the food pusher.
•
After use switch the unit off and unplug it
from the power supply.
REVERSE FUNCTION
•
Feed screw will be rotating in the opposite
direction, and the head will get empty.
•
If it doesn't work, switch the unit off and
clean it.
MAKING SAUSAGE
Before starting please assemble sausage
attachment as per following (fig. C)
CLEANING AND MAINTENANCE
DISASSEMBLING
•
Make sure that the motor has stopped
completely.
•
Disconnect the plug from the power outlet.
•
Disassemble by reversing the steps from
assembling.
•
If the fixing ring is not easily removed by
hands, please use tools.
•
To remove the cutting plate easily, place a
screwdriver between the cutting plate and
the head as illustrated and lift it up.
CLEANING
•
Remove meat, etc.
•
Wash each part in warm soapy water.
•
Dishwasher safe stainless steel parts..
•
Do not immerse the motor housing in
water, but only wipe it with a damp cloth.
•
Thinners and petrol will crack of change
the color of the unit.
•
Wipe all the cutting parts by vegetable oil-
wet cloth.
SPECIFICATION
Rating:
220-240V, 50-60Hz
Power:
500W
Environment friendly disposal
You can help protect the environment!
Please remember to respect the
local regulations: hand in the non-working
electrical equipments to an appropriate waste
disposal center.
3
Publicité
Table des Matières
