Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
• Make sure to match the charger voltage to the voltage on the
battery markings. Wrong voltage can destroy the charger
and/or battery.
• The security circuit ensures that there is no voltage at the
battery clamps when there is no battery connected.
• Make sure to match the (+) and (-) polarity markings.
• Do not clean the inside of the product.
Installing the app
1. Download the Nedis Smartlife app for Android or iOS on
your phone via Google Play or the Apple App Store.
2. Open the Nedis Smartlife app on your phone.
3. Create an account with your mobile phone number or your
e-mail address and tap Continue.
4. Enter the received verification code.
5. Create a password and tap Done.
6. Tap Add Home to create a SmartLife Home.
7. Set your location, choose the rooms you want to connect
with and tap Done.
Connecting the product
1. Plug the power cable A
2. Plug the controller plug A
3. Plug A
into a power outlet.
1
4. Check if A
8
If A
8
does not blink, press and hold the power button
4
A
on A
4
5. Tap + in the top right corner.
6. Under Search Device, select the product from the list of
available devices.
7. Check if A
8
8. Enter the password of the Wi-Fi network to which your
phone is connected and tap Confirm.
9. Rename the product after it has been found and added.
Setting up the product
1. Unplug A
1
2. Clean the surface from dust and grease.
The surface must be smooth. Do not place the product
4
on knitted/wool fabrics, dust wall, rough plastic surface or
frosted glass.
3. Remove part of the 3M tape from the back of A
4. Place the start of A
5. Make sure the power outlet is within reach.
6. Unroll A
.
8
7. Remove the 3M tape and press A
position.
1
is blinking. If so, confirm in the app.
2
for 5 seconds.
is blinking. If so, confirm in the app.
from the power outlet.
8
in the desired position.
into the controller A
into the LED strip A
6
8
into the desired
6
2
.
8
.
8
.
Publicité
Table des Matières
