Quick Start Guide; Intended Use; Safety Instructions - nedis WIFILS51CRGB Guide De Démarrage Rapide

a

Quick start guide

Smart Wi-Fi LED Strip
For more information see the extended manual
online: ned.is/wifils51crgb

Intended use

This product is a Smart Wi-Fi LED strip with a wireless remote
control.
The product is not intended for professional use.
This product is intended for indoor and outdoor use.
Any modification of the product may have consequences for
safety, warranty and proper functioning.
Main parts (image A)
Power cable
1
Controller
2
Brightness buttons
3
Power button
4
Mode button
5
Controller plug
6
IR receiver
7

Safety instructions

-
WARNING
• Ensure you have fully read and understood the instructions in
this document before you install or use the product. Keep the
packaging and this document for future reference.
• Only use the product as described in this document.
• Do not use the product if a part is damaged or defective.
Replace a damaged or defective product immediately.
• Do not drop the product and avoid bumping.
• Do not expose the product to water or moisture.
• This product may only be serviced by a qualified technician
for maintenance to reduce the risk of electric shock.
• Do not unplug the product by pulling on the cable. Always
grasp the plug and pull.
• Only power the product with the voltage corresponding to
the markings on the product.
• Wipe the battery terminals with a clean dry cloth if they are
dirty.
• Non-rechargeable batteries are not to be recharged.
• Do not short-circuit a battery.
• Children of less than 8 years should be kept away.
• Cleaning and user maintenance shall not be done by children
without supervision.
LED strip
8
IR remote
9
Music mode
q
Speed buttons
w
Colour buttons
e
Start/stop moving
r
pattern
5
WIFILS51CRGB