Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
• Install the stand on a flat, stable, clean, non-slip, dry and
fire-resistant surface.
• Prior to each use, always check the stand, stirrer/dis-
perser and accessories for damage. Never use damaged
parts.
Check the mounting position of
WARNING
the stirrer/disperser to avoid the
danger of the unit tipping over.
Observe the maximum permis-
WARNING
sible load-bearing capacity (see
"Technical data").
• You must also follow the safety instructions contained in
the operating instructions for the stirrer or disperser.
Check that the stirrer/disperser
WARNING
is installed correctly before use
and at regular intervals:
- the upper and lower end stops should always be tight
- the container should always be held tightly in place
using the clamping device
- the lockable castors on the stand must be fixed in
place before start-up.
• Unpacking:
- Please unpack the device carefully
- In the case of any damage a detailed report must be
sent immediately (post, rail or forwarder).
• Transport:
Once unpacked, the castors can be used to move the
stand to its final position.
• Use:
The R 2850 floor stand should only be used to hold,
raise and lower stirrers and dispersers. The castors must
be locked when the device is in use.
The castors must be locked when the device is in use
and the container must be held in place using the clips.
• Field of application:
- Laboratories
All manuals and user guides at all-guides.com
Unpacking and transport

Intended Use

- Manufacturing plants
• Because the options for combining products, tools, stir-
ring vessel, trial set-up and medium are nearly endless,
user safety cannot be ensured simply with design re-
quirements on the part of the product. For this reason,
it may become necessary for users to take other precau-
tionary safety measures. For example, glass apparatus
or other stirring vessels that are sensitive to mechanical
stress can be damaged or shattered by an imbalance,
increasing the speed too quickly or too little distance
between the stirring tool and the stirring vessel. Users
can sustain serious injury from glass breakage or from
the freely-rotating stirrer tool.
Serious danger of crushing!
DANGER
When adjusting the height of
the bracket, ensure:
- your fingers do not get caught in the adjusting slot
- nothing becomes caught between the bracket and
devices or other objects attached to the bracket, e.g.
the lower end stop or lip of the container.
• When moving the stand, ensure the stirrer/disperser is at
the lower end stop position.
When setting up the stand, ensure
WARNING
that the feet of the unit cannot re-
sult in someone tripping over.
• Scope of delivery:
- IKA R 2850 Floor stand
- Tension belt and clip
- Allen key
- Operating instructions.
The safety of the user cannot be ensured:
- if the stand is used in conjunctions with accessories not
made or recommended by the manufacturer
- if the stand is not used for the intended purpose as spec-
ified by the manufacturer.
The stand should only be used if it is in perfect working
condition. The correct functioning of the stand must be
checked at regular intervals.
9

Publicité

Table des Matières
loading

Table des Matières