Maintenance And Cleaning; Technical Data - IKA R 2850 Mode D'emploi

The instrument is maintenance-free. It is only subject to the
natural wear and tear of components and their statistical
failure rate.
Check regularly that the end stops and brackets are tight.
Cleaning:
Use only cleaning agents which have been approved by
IKA to clean IKA instruments: water containing tenside/
isopropyl alcohol.
Wear protective gloves during cleaning the instruments.
Spare parts order:
When ordering spare parts, please give:
- device type
- manufacturing number, see type plate
- item and designation of the spare part,
see www.ika.com, spare parts diagram and spare parts
list.
In accordance with IKA warranty conditions, the warranty
period is 24 months. For claims under the warranty please
contact your local dealer. You may also send the machine
direct to our factory, enclosing the delivery invoice and
giving reasons for the claim. You will be liable for freight
costs.
Arm (Ø)
Lifting height (= h1 - h2, see Fig. 2)
Max. load
Min./max. diameter vessel
Max. height vessel
Dimensions (W x D x H)
Weight
Subject to technical changes!
All manuals and user guides at all-guides.com

Maintenance and cleaning

Repair:
Please send in instrument for repair only after it has
been cleaned and is free from any materials which
may constitute a health hazard.
For repair, please request the "Decontamination Certifi-
cate" form IKA or use the download printout of it from
IKA website: www.ika.com.
If you require servicing, return the instrument in its original
packaging. Storage packaging is not sufficient. Please also
use suitable transport packaging.
Warranty
The warranty does not cover worn out parts, nor does it
apply to faults resulting from improper use, insufficient
care or maintenance not carried out in accordance with
the instructions in this operating manual.

Technical data

mm
mm
kg
mm
mm
mm
kg
13 ... 16
1347 (1766 – 419)
8.5
360 ... 800
1000
986 x 999 x 1881
26
12