Safety warnings
Warnings related to electricity
10 A
Warnings related to use
Do not pull the power cord when pulling the power plug of the wine cooler.
Please firmly grasp the plug and pull out it from the socket directly.
Do not damage the power cord under any condition so as to ensure safety
use, do not use when the power cord is damaged or the plug is worn.
Worn or damaged power cord shall be replaced in
manufacture-authorized maintenance stations.
Please use a dedicated three-hole power socket which is 10A or more and
the power socket shall not be shared with other electrical appliances.
The power cord should be firmly contacted with the socket or else fires
might be caused. Please ensure that the grounding electrode of the
power socket is equipped with a reliable grounding line.
The wine cooler machine uses AC power supply of 220V~240V/50 Hz. If the voltage
fluctuation exceed the range of 176~264V, it can cause faults or even damage
of wine cooler. Or it may result in indoor circuit overheat to cause fire.
Then it should be equipped with automatic voltage regulator of over 750W for use.
Please turn off the valve of the leaking gas and then open the doors and
windows in case of leakage of gas and other flammable gases. Do not
unplug the cooler and other electrical appliances considering that spark
may cause a fire.
To ensure safety, it is not recommended that to place socket, regulators,
rice cookers, microwave ovens and other appliances at the top of the
wine cooler, those recommended by the manufacture are not included.
Do not use electrical appliances in the food pantry.
Authorized demolition or renovation of the cooler is not prohibited. It is
forbidden to damage the refrigerant lines and ejecting refrigerant may
cause eye injury or self-ignition, the repair and maintenance of the cooler
must be carried out by professionals.
Damaged power cord must be replaced by the manufacturer, its
maintenance department or related professionals in order to avoid
danger.
The surrounding of the appliances or the embedded structure shall not be
obstructed while good ventilation shall be maintained.
The gaps between cooler doors and between doors and cooler body are
small, be noted not to put your hand in these areas to prevent squeezing
the finger. Please be gentle when switching off the cooler door to avoid
falling articles.
Do not pick foods or containers in the freezing chamber when the cooler
is running, especially metal containers in order to avoid frostbite.
4