Introduction to the wine cooler's functions
Operation panel
Lock key
Display Control
When electrify for the first time, the display screen will be full display for 3 seconds, and the start-up tone
will ring, and then enter into the display of normal operation;
When it is in the lock state, the display screen will be cut-off if no key operation for 30 seconds; the display
screen recover the normal display if any key operation.
This cooler adopts the touch control of the glass door. Touch slightly when pressing the keys. It is to be avoided that
the area of the display panel is scratched by the sharp things and it shall be kept away from the environment of high
magnetic field and high humidity. Otherwise the cooler is possible not to be set and operate normally.
Locking and unlocking
Under the lock state, press the Lock key (
display area will flicker;
Under the unlock state, press the
Except the lighting function, the following functions will be carried out under the unlock state.
Lighting mode
Press the Lighting mode key (
"
Switching of the Fahrenheit temperature and Celsius temperature
"
Press the Temperature-rise key (
temperature and Fahrenheit temperature; the display area will show the setting Fahrenheit temperature or
Celsius temperature under the current mode.
Temperature setting
"
Press the Temperature-rise key (
operate according to the setting value;
"
Press the
Temperature-drop key (
operate according to the setting value.
Memory function
The cooler has the power off memory function. After the power is on again, the cooler will work according to the
setting mode before the power-off.
Fault indication
If the indication of the following table is displayed on the display area, it means the cooler is with faults.
Fault code
Temperature sensor of the
Description
refrigerator with fault
Display area
Lighting mode key
"
"
) continuously for 3 seconds, the locking will be relieved; the
"
"
Lock key (
)
continuously for 3 seconds to enter into the lock state;
) to turn on or turn off the light.
"
"
"
) and the Temperature-drop key (
"
) , the temperature will increase 1℃ (or
, the temperature will decrease 1℃ (or ℉). After locking, the cooler will
"
)
Setting range of the Celsius temperature: 5℃~18℃; setting range of the
Fahrenheit temperature: 41 ℉~65℉.
E1
When the above faults are displayed on the screen, please do not disassemble to
check by yourself. Please contact the special maintenance personnel of the local
after-sales service company for the maintenance.
9
Temperature-rise key
"
) to finish the switch of the Celsius
℉
). After locking, the cooler will
E4
Defrosting sensor of the
refrigerator with fault
Temperature-drop key